Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 12 - Jul 17
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Force 32 1/8 Buggy/Truggy Nitro Engine w/Pullstart FE-3201Force 32 1 8 Buggy Truggy Nitro Engine w Pullstart FE 3201. Features Unique pull start pin design allows conversion to non pull start by purchasing different rear engine covers ABC cylinder & piston set Aluminium piston, Brass cylinder liner with Chrome plating on the cylinder Improved porting for higher torque and RPM power Competition slide valve carburettor Oversized cylinder head for efficient cooling. Includes Ofna Force . 32 cu in (5. 2cc) Pull
Force 32 1/8 Buggy/Truggy Nitro Engine w/Pullstart FE-3201.
Features
- Unique pull start pin design allows conversion to non-pull start by purchasing different rear engine covers- ABC cylinder & piston set-Aluminium piston, Brass cylinder liner
- with Chrome plating on the cylinder
- Improved porting for higher torque and RPM power
- Competition slide valve carburettor
- Oversized cylinder head for efficient cooling.
Includes
- Ofna Force .32 cu in (5.2cc) Pull Start Nitro Engine with instruction sheet
- Rubber exhaust gasket
- Collet and 3x6mm socket head screw to hold clutch assembly to crankshaft
Requires
- Fuel: Car fuel with 20% nitro content
- Glow Plug: Long, without idle bar.
Specifications
- Displacement: .32 cu in (5.2cc)
- Exhaust: Rear
- Bore: 19.5mm
- Stroke: 17.5mm
- Liner : ABC
- Number of Ports: 6
- Crankshaft: 14.0mm SG (pilot) shaft
- Piston: Fully CNC-machined aluminium alloy
- Connecting Rod: 7075 aluminium double bushing
- Claimed Output: 3 @ 33,000RPM
- Max RPM: 36,000
- Needle Settings: Main: 3-3-1/2 turns from closed. Low Speed: Flush with ball end
- Barrel Stop Screws: 1/16" gap to start new engine
- Distance Between Mounting Holes Same Side: 0.83" (21mm)
- Distance Between Mounting Holes Opposite Side: 1.5" (38mm)
- Height Bottom of Mounting Tabs to Top of Cylinder Head:4" (102mm)
- Width at Mounting Tabs: 1.8" (45.8mm)
- Width of Crankcase Below Mounting Tabs: 1.2" (30mm)
- Distance from Pull Start to Front Bearing: 3.3" (84.3mm)
- Distance from Centre of Engine to Front Bearing: 1.8" (45mm)
- Distance from Centre of Engine to Pull Start: 1.5" (39mm)
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 2335 reviews
Sort
Product Reviews
★★★★★ 5
Really a nice product!
Style: 15W Charger, Style: 15W Charger
I wanted a nice magsafe charge/holder for my phone and I tried this one and so far, it's great.
Pros:
- It has a really nice-looking LED behind the magsafe holder which glows nicely, as you see in the pic.
- The plastic feels good, strong and (hopefully) not plastic that degrades and becomes brittle.
- The rubber bumpers which hold it in place under the mount against your display seem well-placed.
- It's fully adjustable between positions wherever you wish to mount it.
- You can mount your phone either above or to the side of the display on any corner which provides nice flexibility.
- I found it best on the upper right because on the left, the steering wheel obscures the phone and the two bottom corners aren't useful to me.
- The little knobs work well to hold it in place and tighten nicely.
Cons:
- The only problem is how the design has the cable visible and sticking out when it could have easily been designed to integrate into the little arm so it's hidden. As it is, the ugly, out of place and avoidable USB-C cable is visible which I don't like.
- You can rotate the holder to make the USB-C cable appear in front of the arm holder so it's less visible but it should have been avoided with a simple design modification and integrated USB cable for a more streamlined appearance.
In any case, this is a nice addition to my Model 3 Performance to hold my phone while I drive, out of the way while still charging.
Try one.
M
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 9, 2025
★★★★★ 5
Amazing iphone mount for Model Y.
Color: Upgraded Version - Gray
I was pleasantly surprised at how this phone mount worked for my purpose. I am a care driver and drive a Tesla Model Y. This mount perfectly fit the screen and my iphone doesn't come off even when I hit a pothole.
The best part of this mount is the price. One cannot find anything cheaper than this.
As for the function, this mount really fits the bill. Thumbs up!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 9, 2026
★★★★★ 5
Easy to use and lightweight
Color: Upgraded Version - Gray
Easy to use and able to use it on table top or as a tall stand on the floor
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 1, 2026
★★★★★ 3
Decent MagSafe phone mount
This was just an average MagSafe. Build quality is ok. The material, especially the plastic parts, feel cheap. The design is nothing to brag about. It can be mounted anywhere along the edge of the screen. Although it's marketed as for the Telsa Model 3/Y, It can be used with any cars with a tablet that fit's the dimension. I actually had problems installing it because I have a screen protector on and the added thickness resulting it the mount barely being able to squeeze it.
Note the design prevents adjustments in certain mount positions as the end of the slider will run up against the lock nut. Magnetic strength is acceptable although I question the stability when the slider is at it's maximum extension with a phone mounted.
Overall, it's perfectly functional but I would prefer something a bit more refined and minimalist.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 4, 2025
★★★★★ 5
Buen producto
Color: Upgraded Version - Gray
Execelente
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 15, 2025
recommand products
Female Elbow 1-3/16-12 x 3/4
25.24
Female-Branch-Tee-Thread 1 2 1-7/8-12 Thread 3 1-1/2
118.29
UPINS 1500 Pcs Point Dots Balloon Glue Removable Adhesive Point Tape, 15 Rolls Double Sided Dots Stickers for Craft Wedding Decoration
24.90
Skillmatics Art & Craft Activity - Foil Fun Animals, No Mess Art for Kids, Craft Kits & Supplies, DIY Creative Activity, Gifts for Boys & Girls Ages 4, 5, 6, 7, 8, 9, Travel Toys
50.94
Air Dry Clay 36 Colors, Soft & Ultra Light, Modeling Clay for Kids with Accessories, Tools and Tutorials
50.98